Toyota Genuine Parts

Toyota Key Parts

Toyota Key Parts
01

ELEMENT

A Genuine Toyota Oil Filter contains a dual-textured elements – rough on the outside, fine on the inside – which filters particles effectively and resists cloggong. Non-genuine oil filters are thin and finely meshed, makiong them prone to tearing and clogging, and will have to be replaced more frequently.

Toyota Key Parts
02

SEALING CAPABILITY (FOR GASKET)

For added durability, a Genuine Toyota Oil Filter uses gaskets made with heat-resistant, non-stick acryl rubber. Non-genuine filters may use gaskets that easily deform or deteriorate, making them prone to leaks. They may also use poorly constructed fitting faces which could cause engine damage.

Toyota Key Parts
03

CHECK VALVES AND RELIEF VALVES

A Genuine Toyota Oil Filter has check and relief valves made of durable, heat resistant rubber. They deliver long-lasting stable performance. Non-genuine check and relief valves may not be properly constructed and could cause extensive engine damage. The relief valves may open prematurely, releasing dirty oil into the engine. The check valves may fail to prevent oil from flowing backward when the engine starts.

Toyota Key Parts
04

OIL FILTER FOR DIESEL ENGINES

A Genuine Toyota Oil Filter for diesel engines effectively filters carbon. Non-genuine oil filters may fail to filter carbon, causing the oil to become dirty. This also results in black smoke emissions and increased fuel consumption, which can cause engine damage.

Toyota Key Parts
01

TRIPLE-LAYERED CONFIGURATION

Genuine Toyota Air Filter elements are triple-layered rough inside and fine outside - which allows them to effectively catch particles of different sizes. Unlike single-layered, non-genuine air filters, the triple-layered elements help resist clogging and have a long service life.

Toyota Key Parts
02

SEALING CAPABILITY

Although non-genuine parts look similar to Genuine Toyota Parts, may use poor quality materials or are poorly constructed. Heat causes many non-genuine air filters to shrink, reducing their sealing capability. As a result, opening in the seal may allow particles or dust to enter, causing engine damage.

Toyota Key Parts
03

FULL FABRIC AIR FILTERS

Due to their high recyclability, Full Fabric Air Filter(FFAF) are now being installed in many Toyota vehicles. Standard Air Filters can not be installed on vehicles with FFAF.

Toyota Key Parts
01

RESISTOR

A Genuine Toyota Oil Filter contains a dual-textured elements – rough on the outside, fine on the inside – which filters particles effectively and resists cloggong. Non-genuine oil filters are thin and finely meshed, makiong them prone to tearing and clogging, and will have to be replaced more frequently.

Toyota Key Parts
02

U-GROOVE GROUND ELECTRODE

A Genuine Toyota Oil Filter contains a dual-textured elements – rough on the outside, fine on the inside – which filters particles effectively and resists cloggong. Non-genuine oil filters are thin and finely meshed, makiong them prone to tearing and clogging, and will have to be replaced more frequently.

Toyota Key Parts
03

HOUSING

A Genuine Toyota Oil Filter contains a dual-textured elements – rough on the outside, fine on the inside – which filters particles effectively and resists cloggong. Non-genuine oil filters are thin and finely meshed, makiong them prone to tearing and clogging, and will have to be replaced more frequently.

Toyota Key Parts
04

HEATING RANGE

A Genuine Toyota Oil Filter contains a dual-textured elements – rough on the outside, fine on the inside – which filters particles effectively and resists cloggong. Non-genuine oil filters are thin and finely meshed, makiong them prone to tearing and clogging, and will have to be replaced more frequently.

Toyota Key Parts
01

ELEMENT COMPOSITION

Genuine Toyota Fuel Filter elements are designed in a honeycomb pattern which helps them maintain shape and last longer. Non-genuine fuel filters easily lose their shape and filtering capability.

Toyota Key Parts
02

ELEMENT MATERIAL

A Genuine Toyota Fuel Filter contains polyester and glass fibers with standard paper filter material. This allow small particles to be caught and held without interrupting the fuel flow. Manu non-genuine fuel filters clog easily which reduces filtering capability.

Toyota Key Parts
03

RUST PROOFING

A Genuine Toyta Fuel Filter is treated with rust proofing on the internal as well as external surfaces. Many non-genuine filters are not treated in this way and see susceptible to internal corrosion caused by the water content of the fuel. Subsequent corrosion may result in engine damage.

Toyota Key Parts
04

SECURE FITTING FOR CASES AND PIPES

A Genuine Toyta Fuel Filter is specifically engineered to fit Toyota engines, ensuring proper fuel flow and optimum engine performance. Non-genuine fuel filters are designed to fit a variety of engines, therefore they may fail to fit properly. Poor fit may result in potentially dangerous fuel leakage.

Toyota Key Parts
01

BRAKE LINING

The lining on Genuine Toyota Brake Pads is specifically designed for Toyota vehicles, ensuring balanced, stable braking in all temperatures. Driving with non-genuine brake pads may not be safe because they fail to provide the stable performance, reliable braking and durability that Genuine Toyota brake pads do.

Toyota Key Parts
02

ENVIRONMENTALLY FRIENDLY

Unlike some non-genuine parts, Genuine Toyota Brake Pads are made without asbestos, which is hazardous to the environment.

Toyota Key Parts
03

ANTI-SKIM SHIM

Genuine Toyota Brake Pads have a finely processed anti-shim skim which prevents the high-frequency vibration that causes brake noise. Non-genuine brake pads do not have an anti-skim shim, making them more likely to squeak.

Toyota Key Parts
04

FITTING

During the manufacturing process, all Genuine Toyota parts undergo strict quality control inspections. Genuine Toyota Brake Pads are carefully checked for proper clearance between the brake pad and the caliper to ensure smooth braking. Since many non-genuine pads are not properly inspected for proper clearance, they may squeak – or even cause brake failures.

Toyota Key Parts
01

RAW EDGE BELTS

Plain: The basic configuration for Raw Edge belts. Strong gripping power makes it suitable for passenger cars and small trucks.

Multi-Ply: Layers of bias cloth are added to the plain belt to make it last longer.

Cogged: A corrugated underside decreases energy loss by bending. Because even larger size belts are flexible, cogged V-belts are often used for diesel-powered vehicles such as trucks and buses.

Toyota Key Parts
02

V-RIBBED BELTS

These are thinner and had large contact area than Raw Edge belts, increasing their flexibility and and efficiency in transferring power. Suitable for small and high-performance engines.

Toyota Key Parts
03

MATERIALS

The bottom layer of a genuine Toyota V-Belt is rubber-coated to prevent cracking. Heat-resistant Aramide Fiber is used for the top fabric and tension member. Non-genuine belts may have simple configuration or an inferior combination of materials. They tend to stretch and wear out quickly.

Toyota Key Parts
04

COMBINATION

A Genuine Toyota V-Belt is designed specifically for your vehicle. Since non-genuine V-belts are not designed for specific cars, they may not be a perfect fit for your engine. Your engine may not run as smoothly as it could, or worse - squeaks and uneven abrasion may occur, requiring early replacement of the belt.

Toyota Key Parts
01

CLUTCH FACING

The facing on a Genuine Toyota clutch has groves which helps the car run smoothly despite the stops and starts of normal driving. Since the facing on many non-genuine parts does not have grooves, clutch disc often get stuck, causing the car to run poorly. A Genuine Toyota Clutch is also made with environmentally friendly non-asbestos, glass fiber which is more durable.

Toyota Key Parts
02

DAMPER

Genuine Toyota dampers are specifically engineered to enhance the performance of Toyota cars. They absorb rattles and vibration, ensuring smooth starts and responsive acceleration. Although non-genuine dampers look the same from the outside, they do not deliver the same well-tuned performance. The car may not start smoothly, and engine noise and vibration may occur.

Toyota Key Parts
03

DIAPHRAGM SPRING

To increase their durability, Genuine Toyota diaphragm springs are hardened and coated with chrome. Without this added protection, non-genuine parts may bend or wear easily, shortening the life of the clutch cover and therefore the life of the part.

Toyota Key Parts
01

BEST SETTING

Genuine Toyota Shock Absorbers are specifically designed for each model, which helps to optimize performance. Since many non-genuine shock absorbers are designed to fit a variety of cars, they fail to enhance performance. The result is rough, noisy driving.

Toyota Key Parts
02

HIGH QUALITY MATERIALS

Genuine Toyota Shock Absorbers include Teflon™ processed pistons bands and piston rods which are galvanized with hard chrome or bearings. These long lasting parts work smoothly to reduce noise and abrasion and make driving more comfortable. Since many non-genuine shock absorbers are not Teflon™ processed or galvanized, they wear out faster and may cause rough driving.

Toyota Key Parts
03

RUSH RESISTANT

Genuine Toyota Shock Absorbers are highly rust-resistant. Cylinders have special coatings and spring sheets are made from corrosion resistant steel with a cation-coated surface. Non-genuine shock absorbers may not offer the same level of corrosion resistance as Genuine Shock Absorbers, which could result in premature rusting.

Toyota Key Parts
04

PERFECT FIT

All Genuine Shock Absorbers include bushings. Although some non-genuine shock absorbers also include bushings, they are often designed to fit a variety of housings. Often they fail to fit perfectly, you may experience noisy, uncomfortable driving.

Toyota Key Parts
01

DURABILITY

Genuine Toyota Body Parts are made from galvanized high-strength steel. They last much longer than non-genuine parts which are often made of low grade, non-galvanized steel.

Toyota Key Parts
02

PERFECT FIT

Genuine Toyota Body Parts fit perfectly. Many non-genuine body parts do not and have to be retooled to make them fit. Reshaping weakens body parts and makes them liable to rust. In a worst-case scenario, they may rattle, let in water, or even become disengaged.

Toyota Key Parts
03

PROVEN SAFETY

Even small body parts are essential to maintaining the safety of your vehicle. Genuine Toyota Body Parts undergo extensive development and crash-testing to ensure they offer maximum safety in the event of a collision. The safety of many non-genuine parts is unproven as they are not subjected to actual vehicle crash-testing.

Toyota Key Parts
01

CAPACITY

The capacity of a Genuine Toyota Muffler is appropriate for each model. The result is smooth running and reduced noise. The capacity of non-genuine mufflers is often not sufficient for the engine’s emissions. If exhaust gases are not allowed to flow efficiently, even new non-genuine will emit noise.

Toyota Key Parts
02

SUPPORTING PARTS

The supporting parts on a Genuine Toyota Muffler are strong enough to eliminate muffler vibrations. Since many non-genuine supporting parts are poorly constructed, they transmit vibrations to the chassis creating noise.

Toyota Key Parts
03

RESONATOR

A Genuine Toyota Muffler is equipped with a resonator which helps reduce noise pollution. Although some non-genuine mufflers also have resonators, they often fail to synchronize with the engine and therefore do not efficiently reduce noise.

Toyota Key Parts
04

DURABILITY

A Genuine Toyota Muffler is made from stainless or galvanized steel, adding to their durability. Because some non-genuine mufflers are not corrosion resistant, they do not last long.

Toyota Oils and Chemicals

Toyota Oils and Chemicals

Toyota Motor Oil Synthetic Blend SAE 15W- 50

SAE 15W- 50 is an API SL/CF premium product specifically designed for Toyota.

ADVANTAGES:

01

Tested and approved by Toyota

02

Meets/exceeds Toyota's warranty requirements

03

Formulated for all Toyota's gasoline engines

04

Approved for Toyota turbocharged gasoline engines

05

Provides outstanding protection in all other gasoline engines requiring API SL, SAE 20W-50

API Ratings: SL
SAE Rating: 20W-50
also available in 4 liter packaging

Toyota Genuine Motor Oil SAE 15W-40

is an API CF-4 premium product specifically designed for Toyota.

ADVANTAGES:

01

Tested and approved by Toyota

02

Meets/exceeds Toyota's warranty requirements

03

Formulated for all Toyota's gasoline engines

04

Approved for Toyota turbocharged gasoline engines

05

Provides outstanding protection in all other diesel engines requiring API CF-4 SAE 15W-40

API Ratings: CF
SAE Rating: 15W-40
also available in 4 liter packaging

Toyota Motor Oil Synthetic Blend SAE 15W- 50

SAE 15W- 50 is an API SL/CF premium product specifically designed for Toyota.

ADVANTAGES:

01

Tested and approved by Toyota

02

Meets/exceeds Toyota's warranty requirements

03

Formulated for all Toyota's gasoline engines

04

Approved for Toyota turbocharged gasoline engines

05

Provides outstanding protection in all other gasoline/diesel engines requiring API SL/CF, SAE 15W-50

API Ratings: SL
SAE Rating: 15W-50
also available in 4 liter packaging

Toyota Motor Oil Fully Synthetic Blend SAE 15W-40

is an API SL/CF premium product specifically designed for Toyota.

ADVANTAGES:

01

Tested and approved by Toyota

02

Meets/exceeds Toyota's warranty requirements

03

Formulated for all Toyota's gasoline engines

04

Approved for Toyota turbocharged gasoline engines

05

Provides outstanding protection in all other gasoline/diesel engines requiring API SL/CF, SAE 5W-40

API Ratings: SL
SAE Rating: 15W-50
also available in 4 liter packaging

Toyota Genuine Differential Gear Oil SAE 85W-90

is an API GL-5 premium product specifically designed for Toyota.

ADVANTAGES:

01

Tested and approved by Toyota

02

Meets/exceeds Toyota's warranty requirements

03

Formulated for all Toyota's gasoline engines

04

Approved for Toyota turbocharged gasoline engines

05

Provides outstanding protection in other differential gear requiring API GL-5, SAE 85W-90

API Ratings: GL-5
SAE Rating: 85W-90
also available in 20 liter packaging

Toyota Genuine Manual Transmission Gear Oil SAE 80W-90

is an API GL-4 premium product specifically designed for Toyota.

ADVANTAGES:

01

Tested and approved by Toyota

02

Meets/exceeds Toyota's warranty requirements

03

Formulated for all Toyota's gasoline engines

04

Approved for Toyota turbocharged gasoline engines

05

Provides outstanding protection in other manual transmission requiring API GL-4, SAE 80W-90

API Ratings: SL
SAE Rating: 80W-90
also available in 20 liter packaging

Toyota Genuine Manual Transmission Gear Oil SAE 80W-90

is a heavy duty, high-temperature Brake Fluid specifically designed by Toyota engineers to give superior performance in all Toyota brake systems where DOT 3 brake fluid is recommended. DOT Also available in one (1) liter packaging

Toyota Genuine Manual Transmission Gear Oil SAE 80W-90

is a new generation ethylene glycol-based premium engine coolant offering excellent corrosion protection and designed specifically for all Toyota engines. It also helps prevent cold weather freeze-ups to -37°C and hot weather boil-overs. Factory Red Fluid

Toyota Genuine pre-mixed anti-rust/anti-freeze Super Long Life Coolant

is a new generation ethylene glycol-based premium engine coolant offering excellent corrosion protection formulated specifically for all Toyota warranty requirements. For vehicles filled with Super Long Life Coolant at the plant, it is highly recommended that Super Long Life Coolant be used for maintenance. Factory Red Fluid

Toyota Extra Strength Windshield Washer Fluid

without damaging plastic parts, rubber materials, metal, and pain coating is excellent in dissolving and cleaning the windshield of dirt and road grime, as well as oily residues.

© Toyota Motor Philippines